Regenerative Catalytic Combustion EquipmentIt Is A Typical Gas-solid Catalytic Reaction, Combustion Method, Divided Into Direct Combustion Method And Catalytic Combustion Method. Direct Combustion Refers To The Use Of Fuel Or Gas As Auxiliary Materials To Directly Decompose High Concentration (based On Actual Reports) Exhaust Gases Into Non-toxic Substances At High Temperatures. Catalytic Combustion Method Refers To The Process In Which The Exhaust Gas Is Preheated In Catalytic Combustion Equipment (based On Actual Reports) And Then Passes Through The Catalytic Bed Layer,
The Complete Set Of Regenerative Catalytic Combustion Equipment Includes:
1、 Exhaust Gas Scrubbing Tower:
The Exhaust Gas Scrubbing Tower Is Generally A Vertical Spray Scrubbing Packed Tower, With Alternating Distribution Of Internal Nozzles And Packing Layers. Fillers Have A Large Specific Surface Area, Which Is Used To Increase The Contact Area Between Two Fluids. The Exhaust Gas Enters From The Bottom, Passes Through The Packing Layer And Demister, And Is Discharged From The Top. The Liquid Is Pumped To The Nozzle And Sprayed Downwards, Returning To The Water Tank Through The Packing Layer. Impurities In The Exhaust Gas Adhere To The Packing And Then Enter The Water Tank Under The Action Of Water Flow, Achieving The Purpose Of Interception. Impurities In The Water Tank Need To Be Cleaned Regularly, And Sewage Needs To Be Discharged Regularly.
2、 Photolytic Catalytic Combustion Equipment:
Decompose Polluted Gases Into Stable And Odorless Gases Through Destruction, Decomposition, And Catalytic Oxidation. The Strong Splitting Of C-band Light Pollutes Gas Molecular Chains, Changes The Molecular Structure Of Substances, And Decomposes And Oxidizes High Molecular Pollutants Into Low Molecular Weight Stable Substances Such As Water And Carbon Dioxide. Simply Put, Photocatalytic Oxidation Is A Catalytic Reaction That Occurs Under The Influence Of Visible Light. The Photocatalytic Oxidation Reaction Uses Semiconductors And Air As Catalysts, And Light As Energy To Degrade (based On Actual Reports) Into CO2, H2O, And Other Stable Components.
3、 The Pre-treatment System Of Catalytic Combustion Treatment Process Usually Uses Supporting Purification Equipment And Accessories Such As Pre-treatment Unit, Water Curtain Purifier, Spray Purifier, Dust Collector, Dust Collector, Etc. In Exhaust Gas Treatment, There Are Usually Mixtures Of Particulate Matter, Paint Mist, Heavy Metals, Halogen Compounds, Etc. (based On Actual Reports). Therefore, These Mixtures Should Be Strictly Purified Before (based On Actual Reports) Exhaust Gas Purification.
4、 Catalytic Combustion Bed: Composed Of Electric Heating Chamber, Catalytic Chamber, Heat Exchanger, Flame Arrester, Temperature Detector, Electric Valve, And Insulation Pipeline. Use An Electric Heater To Heat The Exhaust Gas Generated By The Production Line, So That (based On Actual Reports) The Exhaust Gas Is Converted Into CO2 And H2O At Around 280 ℃ -300 ℃ Under The Action Of A Catalyst, Releasing A Large Amount Of Heat, And Then Reused Through A Heat Exchanger.
5、 Control System: Composed Of PLC Control Cabinet, Temperature Display Instrument, Electric Valve Actuator, And Panel Simulation Flowchart.
