Dust Collector For FoundryBased On The Complex Process Of Sand Preparation And Sand Treatment Workshop In The Foundry, Large Material Conveying Volume, Multiple Process Equipment, And Multiple Dust Points, A Back Blowing Bag Filter Suitable For The Foundry Sand Treatment Workshop Has Been Produced. This Dust Removal System Has Absorbed Experience And Reformed The Process Of Dust Collectors In Casting Factories, Achieving The Highest Standards For Sand Processing Production Lines And Improving The Working Environment For Workers.
The Dust Collector In The Foundry Has Good Sealing, Flexible Rotation, Easy Replacement Of Dust Filter Bags, A Dust Removal Effect Of Over 90%, And A Dust Emission Concentration Lower Than The Standard. The Dust Removal Bag Adopts A Flat Bag Structure With A Simple Structure And Compact Arrangement. The Filtering Area Refers To The Elevation, And The Back Blowing Amplitude Is Large, Making It Easy To Shake Off Accumulated Dust. It Is An Ideal Electric Furnace Dust Collector For Sand Preparation And Production Sections In Foundries.
Main Technical Features Of Dust Collector In Foundry:
1. The Body Structure Is Compact And The Layout Is Reasonable. Compared With Other Dust Collectors That Handle The Same Air Volume, It Occupies A Small Area And Has A Large Filtration Area.
2. Less Moving Parts, Good Sealing Performance, Compartment Cleaning, Continuous Operation. Clean Up The Dust By Blowing Back Into The Room,.
3. Filter Bag Structure, Good Moisture Resistance, Easy To Replace Bags In Different Rooms, And Convenient Maintenance And Management.
4. It Can Be Controlled Automatically Or Manually, And Is Easy To Operate.
Characteristics And Functions Of Dust Collectors In Foundries:
1. Clean The Dust. By Spraying The Filter Bags One By One Through The Nozzle, The Pulse Valve Opens And Releases A Large Amount Of Air, Resulting In Good Dust Cleaning Effect Among Similar Bag Filters.
2. Low Emission Concentration. The Bag Filter System Can Achieve Dust Removal With An Emission Concentration Of Less Than 30mg/Nm3 (expected Value ≤ 20 Mg/Nm3). Even With The Increasing Emission Standards, It Can Ensure That There Will Be No More Problems Of Exceeding Emission Standards Within 15 Years, Solving The Problem Of Dust Emission Compliance.
3. Stable Efficiency. When The Combustion Conditions Or Smoke Parameters Of The Boiler Fluctuate And Change, Or When The Boiler Peak Shaving And Coal Type Change, The Bag Filter Effect Is Not Affected.
4. Low Filtering Wind Speed., The Filtering Wind Speed Is 0.97m/min, Creating Conditions For The Dust Removal System Resistance To Be Less Than 1500Pa.
5. Low Operating Resistance. The Side In And Top Out Air Intake Method Has A Simple Process, Smooth Flow, And Low Resistance.
