Electrical Tar PrecipitatorIt Is An Environmentally Friendly Equipment Used For Industrial Waste Gas Treatment, Widely Used In Industries Such As Power, Steel, Chemical, Textile, Etc. It Generates An Electric Field Through The Action Of Current, Which Charges Particles And Tar Particles In The Flue Gas And Adsorbs And Captures Them, Thereby Achieving The Goal Of Purifying Emissions. This Article Will Provide A Detailed Introduction To The Electric Tar Catcher, Including Its Working Principle, Advantages, And Precautions For Use.
1、 Working Principle Of Electric Tar Catcher
Electric Tar Catcher Is A Device That Uses An Electric Field As A Purification Method. After Pre-treatment, The Flue Gas Enters The Electrostatic Tar Precipitator And Generates An Electric Field Through The High-voltage Electrode. Under The Action Of The Electric Field, The Particles And Tar Particles In The Flue Gas Are Charged And Adsorbed And Collected On The Collector Plate Near The Electrode. After Multiple Processes Such As Aggregation And Impact, The Aggregated Particles And Tar Particles Fall Onto The Slag Collection Area And Are Cleared Out Of The System.
2、 Advantages Of Electric Tar Catcher
1. Purification Effect: The Electric Tar Catcher Captures Particulate Matter And Tar Particles In The Flue Gas Through The Action Of An Electric Field, And Can Purify Pollutants In The Exhaust Gas To A Lower Level. Meanwhile, The Purification Efficiency Of The Electric Tar Catcher Is Good, Reaching Over 90%.
2. Low Energy Consumption: The Energy Consumption Of Electric Tar Precipitators Is Relatively Low, Greatly Reducing The Cost Of Environmental Purification.
3. Easy To Operate: The Operation Of The Electric Tar Catcher Is Very Simple, Generally Only Requiring Following The Operating Instructions.
4. Long Service Life: Due To The Use Of Excellent Materials And Specialized Manufacturing Processes, The Electric Tar Catcher Has A Relatively Long Service Life And Does Not Require Routine Maintenance.
5. Small Space Occupation: The Overall Size Of The Electric Tar Catcher Is Small, Which Not Only Facilitates Installation But Also Reduces The Occupation Of Production Sites.
3、 Precautions For The Use Of Electric Tar Precipitators
1. Current Density: Proper Optimization Design Should Be Carried Out Based On The Characteristics Of The Treated Exhaust Gas And The Composition Of Particulate Matter, And Should Not Exceed The Specified Current Density.
2. Electrode Position: The Electrode Position Should Be As Close As Possible To The Entrance To Improve The Purification Effect.
3. Maintenance: The Electric Tar Catcher Should Be Regularly Inspected And Cleaned Of Components Such As Electrodes, Slag Collectors, And Collector Plates To Maintain Its Normal Operation.
4. Develop A Comprehensive Purification Plan: Prior To The Installation And Use Of The Electric Tar Precipitator, A Corresponding Treatment Plan Should Be Developed Based On The Composition Of The Exhaust Gas, Emission Requirements, And Purification Effect.
5. Cleaning Cycle: The Cleaning Cycle Is Generally 20-30 Days, Depending On The Composition Of The Flue Gas.
