Wood Factory Dust CollectorWe Can Use Large-scale Equipment As The Overall Dust Collection And Treatment For The Entire Workshop Assembly Line. We Can Also Make It Into Small Ones That Can Be Installed On Or Near The Dust Dispersion Equipment. It Can Also Be Installed On The Vehicle As A Mobile Filter. This Compact And Flexible Bag Filter Is Particularly Suitable For Dust Removal From Hand Dispersed Dust Sources.
Most Dust Collectors In Wooden Factories Adopt Centralized Processing Systems, Which Can Save Investment And Facilitate Management. During The Production And Processing Of Woodworking Machinery In Furniture Factories, A High Concentration Of Dust Is Generated, Which Seriously Affects The Working Environment Of The Woodworking Workshop. Therefore, Our Company Has Designed And Produced A Dust Collector System Specifically For Furniture Factory Production Workshops Based On The Characteristics Of Woodworking Workshop Dust. The System Has A Simple And Compact Structure, Low Steel Consumption, And Higher Capture Capacity Compared To Lighter Fibrous Dust Such As Sawdust, Shavings, Asbestos Powder, Tobacco, Etc. Dust Removal Process: The Dust Generated By Woodworking Equipment During Production Is Collected By The Dust Removal System's Suction Duct, And Then Enters The Woodworking Dust Collector Through The Regulating Disc Valve And Inlet Duct. The Dust Is Trapped Outside The Filter Bag, And The Clean Gas Is Discharged Into The Atmosphere Through The Filter Bag, Induced Draft Fan, And Chimney To Meet The Standard. This Not Only Achieves The Goal Of Recovering Dust And Purifying Exhaust Gas, But Also Ensures That All Emission Indicators Meet The Emission Requirements.
Design Principles For Dust Collectors In Woodworking Factories
① According To The Causes Of Dust Generation, The Specific Situation Of Workshop Site And Equipment Layout, Plastic Vacuum Hoses Are Used To Connect Production Equipment, So That The Vacuum Hose Does Not Affect The Operation Of Production Equipment, And Can Also Suck The Dust Containing Wood Chips Into The Dust Removal System For Treatment And Purification Before Discharge.
② Adopting Excellent Dust Removal Processes And Equipment, Confirming The Long-term Stable Operation Of The Dust Removal System, Meeting The Requirements Of Local Standards For Exhaust Gas Emissions, Minimizing Project Investment And Equipment Operating Costs, And Making The Equipment Easy To Maintain And Repair.
③ During The Operation Of The Dust Removal System, The Main Objective Is To Minimize The Overflow Of Dust, Reduce Factory Pollution, And Achieve Significant Practical Effects On The Ambient Air.
④ Confirm That The Construction And Installation Process Does Not Affect Production.
The Dust Collector In A Wood Factory Is A Dust Removal Device That Uses High-pressure Pulse Jet Cleaning And Circular Filter Bag Design For Fully Automatic Control. Its Structure Is Very Simple And Easy To Understand, Mainly Consisting Of A Shell Part, Ash Hopper And Ash Unloading Mechanism, Inlet And Outlet Air Box Body, Pulse Ash Cleaning Device, Compressed Air Pipeline And Its Pressure Reducing Device, Oil-water Separator, Oil Mist Device, Pillar And Vertical Cage Ladder, Railing, Etc. This Type Uses A Rear Mounted Fan For Negative Pressure Suction, Which Has Good Efficiency, Good Suction, Reduces Wind Resistance, And Improves Dust Removal Efficiency. It Is Easy To Construct And Can Be Flexibly Moved If There Are Changes In The Factory's Process Flow, Meeting Production Needs.
