1Pulse Bag FilterRegularly Measure Process Parameters Such As Smoke Volume, Temperature, Concentration, Etc. If Any Abnormalities Are Found, The Cause Should Be Identified And Dealt With In A Timely Manner.
2. When Using A Timed Dust Cleaning Controller, It Is Necessary To Regularly Measure The Accuracy Of The Dust Cleaning Cycle, Otherwise Adjustments Should Be Made. When Using A Fixed Resistance Pulse Controller, The Working Condition Of The Pressure Switch, Whether The Pressure Tap Is Blocked, And Cleaning Should Be Carried Out Regularly.
3. When Shutting Down, After The Process System Stops, The Pulse Dust Collector And Exhaust Fan Should Continue To Work For A Period Of Time To Remove Moisture And Dust From The Dust Removal Equipment. It Should Be Noted That When The Dust Collector Stops Working, It Is Necessary To Repeatedly Clean The Dust Collector (manual Cleaning Can Be Used) To Remove The Dust On The Dust Removal Filter Bag To Prevent It From Being Affected By Moisture And Sticking To The Bag.
4. If The Electromagnetic Pulse Valve Malfunctions, It Should Be Promptly Eliminated. If There Are Impurities Or Moisture Inside, It Should Be Cleaned. If The Diaphragm Is Damaged, It Should Be Replaced In A Timely Manner.
5. Management Personnel Should Be Familiar With The Principles, Performance, And Operating Conditions Of Dust Collectors, And Master Adjustment And Maintenance Methods.
6. When Starting Up, The Compressed Air Should Be Connected To The Air Storage Tank First, The Control Power Should Be Connected, And The Ash Discharge Device Should Be Started. If There Are Other Equipment In The System, Downstream Equipment Should Be Started First.
7. Mechanical Moving Parts Such As Reducers And Ash Conveying Devices Should Be Oiled And Changed According To Regulations. Any Abnormal Phenomena Should Be Promptly Eliminated.
8. The Oil-water Separator In The Air Storage Tank And Gas Source Triad Should Be Drained Once Per Shift, And The Oil-water Separator Should Be Cleaned Every 3-6 Months. The Oil Mist Device Should Be Checked For Oil Storage Regularly And Refilled In A Timely Manner.
Due To The Fact That The Pulse Bag Filter Is Divided Into Several Box Areas, The Above Process Is Carried Out Box By Box. While One Box Area Is Cleaning, The Remaining Box Areas Are Still Working Normally, Ensuring The Continuous And Normal Operation Of The Equipment. The Key To Being Able To Handle High Concentration Dust Is That This Strong Cleaning Requires A Short Cleaning Time.
