What Should Be Noted When Choosing A Zeolite Wheel?
Zeolite RotorIt Is A Type Of Exhaust Gas Treatment Equipment That Is Easy To Operate In Practice And Can Monitor Important Operational Data Using A Human-machine Interface. What Issues Should We Pay Special Attention To When Choosing?
1、 Pay Special Attention To The Equipment Used In The Front-end To Remove High Boiling Point Substances. If High Boiling Point Substances Are Adsorbed On Zeolite Wheels, The Desorption Temperature Will Increase. Then, The Desorption Temperature Of The Adsorbed Substance Should Be Controlled Within The Working Range Deeply Penetrated By The Zeolite Wheel. If It Is Higher Than This Range, It Will Be Eliminated In The Front-end Preparation Process.
2、 Pay Special Attention To The Desorption Heat Capacity And High-temperature Desorption Treatment Of The Equipment. In Order To Increase The Desorption Temperature Of The Zeolite Wheel, The Temperature Should Be Controlled Within A Reasonable Range And Should Not Be Too High To Avoid Excessive Waste Heat Affecting The Effectiveness Of The Adsorption Section; If We Want To Increase The Desorption Air Volume, We Need To Reduce The Zeolite Wheel Equipment To Achieve Sufficient Desorption Effect. When Choosing A Zeolite Wheel, Special Attention Should Be Paid To The Above Aspects, Which Can Be Used As A Reference For Actual Operation. The Content Of Zeolite Determines The Adsorption Efficiency, So The Content Of Zeolite Is Very Important.
3、 Before Entering The Zeolite Wheel, It Is Necessary To Remove Gases With Air Humidity Above 70%. Before Entering The Zeolite Wheel, It Is Necessary To Freeze The Gas And Focus On Clinical Effects. Meanwhile, Sulfur-containing Acid Gas Needs To Be Prepared And Removed Before Entering The Zeolite Channel, Which Requires Corrosion Of The Framework Structure Of The Zeolite Channel. In Order To Improve The Service Life And Adsorption Capacity Of Zeolite Rotors, It Is Necessary To Prepare The Gas In Advance.
